Orbi purple light problem is the most common issue among Netgear Orbi customers. Are you seeing the Orbi router’s LED light purple? It is worth taking a slow walk through this article if you’re confirming that it is. You will have finished reading the article by the time you’re done.
Learn how to fix Netgear Orbi Purple Light Issue
Reset Your Orbi
Sometimes, the most simple solution to tech problems is the best. This results in everyone being relieved. This solution doesn’t require a detailed guide, as the name suggests.
We won’t be just removing the Orbi, but also disconnecting the modem.
- Turn off the modem, and also disconnect the Orbi.
- Five minutes of transcendental meditation or just five minutes. Then plug your modem back into the wall.
- Give it another second before it boots up fully.
- Now you can reconnect your Orbi, and the reset process should be completed.
- Your Orbi should now be a beautiful blue color instead of purple. Let’s see if it remains purple.
Check the Ethernet Connection
It can sound condescending and annoying to be asked if something is plugged in. However, ethernet cables can sometimes be very finicky. You should check that all cables are properly secured, regardless of whether you believe you touched them.
Verify Power Supply
An insufficient power supply could also be a reason you are experiencing the Netgear Orbi violet light problem. Make sure your wall socket that is plugged into the socket isn’t damaged.
If it is the case, you can plug your Netgear Orbi router in to a different outlet. This might solve the purple light problem.
Retry Syncing your Orbi and Satellite
Do not be intimidated by the terms used. This solution is simple and straightforward. Follow the instructions below to avoid making mistakes.
Retry to Sync Your Orbi & Satellite
The terminology is not confusing. It’s very simple and straight forward. You should not make any mistakes if you follow these directions.
Note: Keep your Orbi and satellite as close as possible in order to strengthen the connection.
- Locate and click the syn button from your Orbi device. It will be located directly next to both the Internet, and Ethernet ports.
- Now, go to your satellite. Press the Sync button. Make sure this takes less than 120 seconds.
- Allow the two to synchronize for a while.
- If everything went well, your Orbi should flash white. This indicates that it is trying to connect to your satellite.
- Again, make sure the light is on. If it is not, we can look for solutions that aren’t related to the object.
Orbi Firmware Update
What has happened? Is the Netgear Orbi purple-light issue still a problem? That is very unfortunate. Don’t worry. Follow these guidelines to learn how to update Orbi to the latest version.
- Turn on your computer.
- Access orbi login by opening an internet browser and go to the orbilogin.com
- After you have logged in to Netgear Orbi, enter your default admin details.
- Click on the Log in button.
- Go to the Settings section.
- Select Maintenance > Firmware Upgrade.
- Follow the prompts on-screen.
After you have finished updating your Netgear Orbi router’s firmware, verify that the LED has gone green. Still no luck? You might have WiFi interference. Follow the next hack.
Factory Reset of the Orbi
We are not hesitant to suggest a factory reset as this will cause you to lose all your settings and passwords.
Sometimes, if all else fails, you have to reset the device from scratch.
Conclusion
The Netgear Orbi Purple Light Issue is one of the most frequent issues users encounter. It is not difficult to fix. We hope you found the article helpful and that it helped you solve the problem. Please leave a comment to show your appreciation.
